Guide Bars, Chains, and Sprockets for Husqvarna

Referred to as a 14" Guide Bar based on cutting depth, this bar measures 19.9" from tip to tip. For use on large gas saws. Will be replaced by the IB14-632195.

*** THIS BAR IS NO LONGER AVAILABLE *** Replaced by the IB16-632196. Referred to as a 16" Guide Bar based on cutting depth, this bar measures 21.7" from tip to tip. For use on large gas saws running 3/8-inch pitch chains.

*** THIS BAR HAS BEEN SUPERCEEDED TO THE IB12-635705 *** Referred to as a 12" Guide Bar based on cutting depth, this bar measures 17.4" from tip to tip. For use on ICS 695XL-GC powerheads with 3/8-inch pitch chains.

Husqvarna 9-Spline drive sprocket for ICS FORCE3 Chains Part Number: 506334201

This bar replaces IB16-71600. 16-inch cutting depth, 21.7-inches from tip-to-tip. Runs Force3 3/8-inch pitch chains on large gas saws.

Referred to as a 12" Guide Bar based on cutting depth, this bar measures 17.4" from tip to tip. For use on large gas (ICS 695XL-GC ) power heads running 3/8-inch pitch chains.

This a 12-inch guide bar compatible with large gas (695XL-F4) ICS power heads running .444-inch Force4 chains. Its total length from tip-to-tip is 18-inches.

Referred to as a 14" Guide Bar based on cutting depth, this bar measures 19.9" from tip to tip. For use on large gas saws.
3/8" Pitch

*** THIS BAR IS NO LONGER AVAILABLE *** replaced by IB16-635701. Referred to as a 16" Guide Bar based on cutting depth, this bar measures 21.9" from tip to tip. For use on large (695XL-F4) gas power heads running .444-inch pitch chains.

Referred to as a 20" Guide Bar based on cutting depth, this bar measures 24" from tip to tip. For use on large gas (ICS 695XL-F4) power heads running .444-inch pitch chains.