FXA60A6 MQ High-Cycle Concrete Vibrator, 2-3/8" x 20'
CESSCO sells the Multiquip FXA60A6 with free freight to most lower 48 destinations.
| Article number: | MUL-FXA60A6 |
| Availability: | Out of stock |
Multiquip FXA60A6 High-Cycle Vibrator*
*Prices, features and equipment specs. are subject to change without notice.
High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95% of their power under load.
- 2.375" head, 20' hose, 33' cord, 180 Hz
- Powered by a 4.5-amp electric motor
- Permanently lubricated oversized head bearings for unmatched durability
- Waterproof control box
- Optional 50- and 100-foot (15, 30 meters) extension cords available
- Requires high-cycle generator GDP5HA
- Visit mfg. website for more info: https://www.multiquip.com/multiquip/FXA60A6.htm
Related products
CESSCO sells the Multiquip FXA50A4 with free freight to most lower 48 destinations.
$1,658.95
CESSCO sells the Multiquip FXA50A6 with free freight to most lower 48 destinations.
$1,848.95
CESSCO sells the Multiquip FXA60A4 with free freight to most lower 48 destinations.
$1,868.95
CESSCO sells the Multiquip 180EC100 with free freight to most lower 48 destinations.
$558.95
CESSCO sells the Multiquip 180EC50 with free freight to most lower 48 destinations.
$438.95
CESSCO sells the Multiquip GDP5HA with free freight to most lower 48 destinations.
$4,388.95