Showingof 245 item(s)
Chain Tensioner for use with med gas saws like the 680ES
$29.95
POWERGRIT XL Combo Pack for large gas saws include:
(2) P/N 607664 PowerGrit XL 29 Chains
(1) P/N 635701 FORCE4 16" Guide bar
(1) P/N 525496 FORCE4 Sprocket for ICS Gas Saws (7-spline)
FREE GROUND FREIGHT.
(2) P/N 607664 PowerGrit XL 29 Chains
(1) P/N 635701 FORCE4 16" Guide bar
(1) P/N 525496 FORCE4 Sprocket for ICS Gas Saws (7-spline)
FREE GROUND FREIGHT.
$1,059.90
Cut up to fifteen inches deep with the powerful ICS 890F4 hydraulic. Uses .444" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi. EVERY SAW PACKAGE includes Powerhead, Guide Bar, TWO chains, and FREE GROUND FREIGHT.
$4,699.95
Cut concrete up to twelve inches deep with the powerful ICS 695XL-F4. Configured for .444" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi. 6.4 HP two-cycle engine. Includes TWO CHAINS AND FREE GROUND FREIGHT.
$3,069.95
Cut concrete up to sixteen inches deep with the powerful ICS 695XL-GC.
Uses 3/8" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi.
Includes TWO CHAINS and FREE GROUND SHIPPING.
Uses 3/8" Pitch bars and chains. All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi.
Includes TWO CHAINS and FREE GROUND SHIPPING.
$2,999.95
14-inch FORCE3 General purpose chain (16" on RockBoss Saws). For use on ICS 613GC, 680, 680ES, 623/633GC, 695XL-GC, and Stihl RockBoss power heads running 3/8" pitch chains. Good for cutting brick, cinder block, and abrasive natural stone.
$569.95
3/8" Pitch for use with TwinMAX and FORCE3 Chains P/N 70949.
Includes Free Ground Shipping within Continental United States.
Includes Free Ground Shipping within Continental United States.
$29.95
*** LIMITED QUANTITIES AVAILABLE *** Referred to as a 13" Guide Bar based on cutting depth, this bar measures 14.9" from tip to tip. For use on 814PRO saws. Will be replaced by the IB13-635696.
$189.95
A perfect choice for the occasional concrete cutter. Power Head is equipped with a 3/8" Pitch drive sprocket, 0.444" Pitch drive sprocket available upon request. Easy to start with a new multifunction lever to control choke, run, and stop functions.
$1,289.95
Referred to as a 14" Guide Bar based on cutting depth, this bar measures 19.9" from tip to tip. For use on large gas saws.
3/8" Pitch
3/8" Pitch
$199.95
*** THIS CHAIN IS DISCONTINUED *** The replacement is the new ICS Speed King Premium S with Trident Segment Technology.
$909.95
This bar replaces IB16-524490. 16-inch cutting depth -- measures 21.9-inches from tip-to-tip. For use with large gas (695XL-F4) power heads running .444-inch pitch chains.
$259.95